| |
|
|
Scroll Saw Blade Caddy
Scrap wood and a little plexiglas and you will have a place to store your scroll saw blades. The ple...
Woodworking (free plans)
Try your own Google Search for
scroll saw, blade storage, workshops, free woodworking plans |
Drying Rack
Make this drying rack from scraps you may already have on hand. Simple yet effective....
AtelierDuBricoleur (free plans)
Try your own Google Search for
drying racks, finishing racks, workshops, free |
|
Total woodworking resources in this category: 185. Displaying Page 4.
|
Glue Bottle Holder
I always seem to be forgetting where I set my glue bottle down last. So I came up with a quick and inexpensive solution.
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Glue Bottle Tote
When it comes to gluing up a project, I can never seem to remember where I left the glue bottle the last time I used it. And once I find the glue bottle, I am forever shaking it and pounding on it as if it were a bottle of ketchup, trying to get the glue to come out. My solution was to make this simple glue bottle tote.
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Handsaw Rack
This simple wall storage rack keeps the saws out of the way but still easily accessible.
|
| Link Type: free plans | Wood Source: Woodsmith | Fix Link? |
|
|
Hole Divider, Large (PDF)
Make precise measurements using this beam divider marking tool. Scribe circles, arches and arcs. Measurements to build this tool are given in both standard and metric.
|
| Link Type: free plans | Wood Source: CraftsmanSpace | Fix Link? |
|
|
Hose Cord Holder
Keep your shop-vacuum hoses in check with this hose/cord holder from IDEA SHOP 3.
|
| Link Type: free plans | Wood Source: WOOD Magazine | Fix Link? |
|
|
Jig, Half Lap Joint
Cutting on-the-money rabbets for half-lap joints with a portable circular saw and handheld router is a breeze with this two-in-one jig.
|
| Link Type: free plans | Wood Source: WOOD Magazine | Fix Link? |
|
|
Jigs, Four Easy
Here is a look at a few simple homemade tools and jigs that can prove useful on all sorts of DIY projects. A jig is an accessory used in woodworking or metalworking that controls the movement or location of a tool.
|
| Link Type: free plans | Wood Source: ExtremeHowTo | Fix Link? |
|
|
Jointer Knife Adjustment Jig
Aligning jointer knives does not have to be difficult. Using an inexpensive dial indicator, a shop-made holder, and these six simple steps, you can achieve perfection in under 30 minutes.
|
| Link Type: free plans | Wood Source: WOOD Magazine | Fix Link? |
|
|
Jointer Pushpad Tool Rest
I move my jointer around the shop thanks to its mobile base, but it seemed like wherever the jointer was, my pushpads were not. So, I came up with this solution.
|
| Link Type: free plans | Wood Source: WOOD Magazine | Fix Link? |
|
|
Knobs, Shop Made Studded
The knobs are made from hardwood scraps that I cut into round blanks with a wing cutter at the drill press...
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Layout Tool
A lay-out tool helps when marking many screw holes all inset the same distance. It can be used to mark four different-size inserts.
|
| Link Type: free plans | Wood Source: Woodnet | Fix Link? |
|
|
Leg Leveler
Most shop floors are uneven. So whenever I build a shop-made tool stand, I allow for some handy leg levelers. (They add about 2 inches to the height of the stand.)
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Lumber Buggy
This is a link to a Google 3D SketchUp drawing for a lumber buggy which gives you a handy way to push material aroung the shop. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.
|
| Link Type: free plans | Wood Source: Google 3D | Fix Link? |
|
|
Make your own Planes
Follow along as Rob Stoakley designs and makes a wooden plane.
|
| Link Type: free plans | Wood Source: WoodworkersInstitute | Fix Link? |
|
More Woodworking Information on these Workshop Pages:first prev 1
2
3
4
5
6
7
8
9
10
11
12
13
next last
|
| 
Roller Stand
Build your own roller stand for the workshop with this easy-to-follow woodworking plan.
...
DempseyWoodworking (free plans)
Try your own Google Search for
roller stand, outfeed, free woodworking plans, projects |
| |
