| |
|
|
Push Sticks and Push Blocks
Work safer in the workshop by building a few push sticks and push blocks. You can even use up scrap ...
CraftsmanSpace (free plans)
Try your own Google Search for
push sticks, push blocks, free woodworking plans, projects |
Thin Push Sticks
To make these thin push sticks I use a piece of 1/4 inch thick hardboard (Masonite). Here is how......
AtelierDuBricoleur (free plans)
Try your own Google Search for
push sticks, thin, woodworking, tablesaws |
|
Total woodworking resources in this category: 19. Displaying Page 1.
|
Push Block
This is a link to a Google 3D SketchUp drawing for a push block to use with a router table. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Not all drawings have the measurements displayed but you can use the measurement tool in SketchUp to easily and accurately determine the dimensions of each lumber part. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.
|
| Link Type: free plans | Wood Source: Google 3D | Fix Link? |
|
|
Push Block and Push Stick (PDF)
This video link covers table saw accessories. Here you will also find push block and push stick plans. First click on - Download FREE Plans & Info - then click on push block and push stick plans. (You might be prompted to submit your email address). The video demonstrates woodworkers top five (plus a few more) table saw accessories.
|
| Link Type: free plans | Wood Source: Woodsmith | Fix Link? |
|
|
Push Block for the Jointer
A push block is a flat board with a top-mounted handle that allows the user to maintain downward pressure. There are two basic designs, each with a distinct function.
|
| Link Type: free plans | Wood Source: Start Woodworking | Fix Link? |
|
|
Push Block, Heavy-Duty
I find many push sticks somewhat unnerving to use. So I made a sturdy push block for my table saw that keeps my hand well above the blade. And the wide body of the block pushes the workpiece on both sides of the saw blade.
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Push Block, Make a
Push sticks and push blocks are necessary tools for the table saw and joiner. They act as extensions for your hands to keep them away from the blade and out of harms way when cutting.
|
| Link Type: free plans | Wood Source: DIYNetwork | Fix Link? |
|
|
Push block, Thin Strip Ripping
Safely rip thin strips between your tablesaw blade and rip fence with this fence-supported pushblock. The replaceable end block allows you to push the thin piece being cut completely through the cutting area, eliminating the chance of kickback.
|
| Link Type: free plans | Wood Source: WOOD Magazine | Fix Link? |
|
|
Push Blocks
This weeks tip is not a new push block design, it is a simple modification you can make to give your old push blocks a better grip.
|
| Link Type: free plans | Wood Source: WoodworkingTips | Fix Link? |
|
|
Push Blocks and Push Sticks
Nearly all of us have a good supply of push-sticks for the tablesaw, bandsaw or router table. However we may not have or use push-blocks to their full extent. A push-block is simply a square or rectangular block of wood, with a handle, that is used on top of the wood - as opposed to a push-stick which is used primarily to push a piece of wood from the rear. In many applications...
|
| Link Type: free plans | Wood Source: CVWA | Fix Link? |
|
|
Push Stick for the Bandsaw
A long reach keeps fingers safe when resawing. This stick is made from 1/2 inch plywood, and the shape is cut on the bandsaw. Edges are rounded over with a rasp or router.
|
| Link Type: free plans | Wood Source: Start Woodworking | Fix Link? |
|
|
Push Stick for the Router Table
This stick is made from 1/2 inch plywood, and the shape is cut on the bandsaw. Edges are rounded over with a rasp or router.
|
| Link Type: free plans | Wood Source: Start Woodworking | Fix Link? |
|
|
Push Stick for the Tablesaw
Use a push stick for safer rip cuts on the tablesaw. All you need is a simple plywood cutout.
|
| Link Type: free plans | Wood Source: Start Woodworking | Fix Link? |
|
|
Push Stick, Making A
If one thing should be on your list it definitely a push stick. Do not limit yourself to one model but ratter to different shape for various application. The push stick can be built from scrap wood such as pieces of plywood.
|
| Link Type: free plans | Wood Source: Knotty Plans | Fix Link? |
|
|
Push Stick, Making A Simple
Works for both a table saw and jointer. Make two of these, use one to push the material through with your right hand and the other in your left hand to hold the material against the fence.
|
| Link Type: free plans | Wood Source: Timeless Treasure Trunk | Fix Link? |
|
More Woodworking Information on these Workshop Pages:1
2
next last
|
|
Push Block
This is a link to a Google 3D SketchUp drawing for a push block to use with a router table. You will...
Google 3D (free plans)
Try your own Google Search for
push blocks, routers, sketchup, Google 3D |
| |
