|
|
| |
|
Easy-Lock Feather Board
Guarantee perfect rip cuts with this quick-to-set tablesaw helper.... WOOD™ Magazine (free plans)
Try your own Google Search
for featherboards. |
|
| |
 Main Sitemap > Workshop Feather Boards
We have 14 links for the woodworking topic Workshop Feather Boards
 |
Feather Board
This hardly counts as the SuperStation’s “first project”, but I wanted to report on it just because it was a first of using the Incra TS III with both the table saw and the new Rout-R-Lift.Did it all work at it was suppose to? Absolutely! The project is the feather board for the table saw.
|
|
free plans courtesy of Wood Shop Demos - Report Link
|
|
 |
Featherboard, Lexan
By Gord Graff in Newmarket Ontario - After posting a “How To” on making traditional feather boards I received a number of e-mails, and one in particular caught my eye. It seems the fellow doesn’t have a band saw which negates the band saw method of making a feather board, and he was concerned about making one using the table saw method.
|
|
free plans courtesy of WoodCentral - Report Link
|
|
 |
Feather Board, Tall
I use my table saw when cutting a groove in the edge of a workpiece. To keep tall pieces stable during the cut I made a featherboard that applies pressure over a wider area of the board.
|
|
free plans courtesy of WoodworkingTips - Report Link
|
|
 |
Feather Boards, Lexan™
These are feather boards (finger boards, hold downs, hold ins.) that I designed using lexan rather than cutting fingers in wood or buying plastic types.
|
|
free plans courtesy of Lee Styron - Report Link
|
|
 |
Featherboard
A featherboard is a tool that has tines on one edge called feathers. The featherboard applies pressure to the edge of a board while it’s being run through a machine. The pressure helps to keep the board from kicking back. When the tines are short, more pressure will occur against the board. Too much pressure against a soft wood can leave an indention on the edge of the wood. With softer woods, use longer tines on your featherboard for more spring.
|
|
free plans courtesy of DIYnet - Report Link
|
|
 |
Featherboards, Traditional
Feather boards have been around in one form or another for a long time and for most woodworkers they are invaluable. It’s like having a second or third pair of hands that never get tired. [At this link] are two methods that I’ve used to make feather boards over the years, one is a band saw method and the other is a table saw method.
|
|
free plans courtesy of WoodCentral - Report Link
|
|
|
Featherboard, A New Kind of
I’ve always had problems with traditional finger-type featherboards. It’s a real nuisance to discover that when the featherboard is applying enough pressure to hold the workpiece securely, it’s hard to push the wood through the blade. I finally came up with a couple of alternatives that hold the stock tightly, yet do not resist forward movement. A further very big advantage of these jigs is that they permit safe climb cutting on the router table for unusual situations or for wood that has a tendency to splinter.
|
|
free plans courtesy of WoodCentral - Report Link
|
|
 |
Feather Boards
Springy fingers, eh? Interestingly enough, the amount of flexibility in a feather board is inversely proportional to its effectiveness; the springier the fingers, the less likely they’ll control your stock when you really need them to. After all,...
|
|
free plans courtesy of Highland Woodworking - Report Link
|
|
| more free woodworking plans |
1 |
2 |
|
|
Feather Board
This hardly counts as the SuperStation’s “first project”, but I wanted to report on it just because it was a first of using the Incra TS III with both the table saw and the new Rout-R-Lift.Did it all ... Wood Shop Demos (free plans)
Try your own Google Search. |
...
|
|
| |
|
Featherboard, Lexan
By Gord Graff in Newmarket Ontario - After posting a “How To” on making traditional feather boards I received a number of e-mails, and one in particular caught my eye. It seems the fellow doesn’t have...
WoodCentral (free plans)
Try your own Google Search. |
|
| .... |
|
| |
to scroll through other related advertising.